8. Close the top cover.
Plugging in the Printer
1.Make sure the printer is turned off. (The “⏐” symbol on the power switch located on the lower right side of the printer should be pressed down.)
2.Check the label on the back of the printer to make sure the voltage matches that of your electrical outlet.
c Caution:If the rated voltage and your outlet voltage do not match, contact your dealer for assistance. Do not plug in the power cord.
3.If the power cord is not attached to the printer, connect the appropriate end to the AC inlet on the printer’s rear panel.
4.Plug the power cord into a properly grounded electrical outlet.