To reset the tear-off position, press the Tear Off button to enter tear-off mode and feed the paper to the tear-off position. Then use the Micro Feed buttons to move the paper to the desired position. See “Adjusting the tear-off position” in Chapter 3.

To adjust the printing position, press either Micro Feed button to advance or reverse the paper to the desired position.

See “Adjusting the printing position” in 4 Chapter 3.

cCaution:

When labels are loaded, use only the top Micro Feed button. Never feed labels backward through the printer.

Pause

Press to temporarily stop printing. Press

 

again to resume printing.

 

Hold down for at least 3 seconds to reset

 

the printer’s control panel settings.

Tractor Select

Selects the front or rear tractor. If you have

Front/Rear

been using paper loaded on one tractor, first

 

remove the printed output before pressing

 

this button to switch the tractor. When you

 

switch between tractors, the paper already

 

loaded in the printer is fed backward to the

 

standby position, and the paper on the

 

newly selected tractor is loaded.

cCaution:

Never use the Front/Rear button when labels are loaded in the printer. Always tear off any printed pages or excess paper so you don’t feed more than one page backward through the printer.

Using the Printer 4-7