State of

Beep

Problem and solution

panel light

pattern

 

 

 

 

n Pause

 

The printer top cover is open.

 

 

 

 

 

Close the cover and press the Pause button.

 

 

 

 

 

The paper selected does not match the paper

 

 

loaded in the printer.

 

 

 

 

∙∙∙

Load the correct paper or select the

 

appropriate paper setting.

 

 

 

 

 

 

 

The printer fails to switch to and feed the proper

 

 

paper.

 

 

 

 

 

Remove any paper in the printer and then press

 

 

the Pause button to reload the paper you

 

 

selected.

 

 

 

f all lights

 

An unknown printer error has occurred.

+

 

 

 

Turn off the printer and leave it for several

Paper Select

 

 

minutes; then turn on the printer again. If the

indicates “E”

 

 

error occurs again, contact your dealer.

and any

 

−

 

number by

 

 

The printer may turn off all lights after 12

turns.

 

 

seconds. Also in this case, turn off the printer and

 

 

 

 

leave it for several minutes; then turn on the

 

 

printer again. If the error occurs again, contact

 

 

your dealer.

 

 

 

n= on, f = flashing

∙∙∙ = short interval, ∙ ∙ ∙ = long interval

8-4Troubleshooting