3.Click the Details button, then click Job Default. You see the Document Properties dialog box, which includes the Form and Orientation settings described below.

If you want to access the form source settings, click the

2

Set Up button instead of the Details button. You see the

Printer Setup dialog box, which includes the Forms Source and Forms Name settings described below.

4.Click Options to open the Advanced Document Properties dialog box, which contains the Graphics Resolution, Color, and Optimization settings.

Changing the printer driver settings

Before printing, check that the printer driver settings are appropriate for the kind of document you want to print, and change the settings as needed. When you are finished making changes, click OK to apply the settings, or click Cancel to cancel your settings.

Printer Setup dialog box

T

Forms

Select the paper source that best meets your

 

Source

needs. There are three cutting method options

 

 

for both the front and rear tractors in the

 

 

Paper source list if the optional perforation

 

 

cutter is installed. For details, see “Using the

 

 

Perforation Cutter” in Chapter 6.

T

Forms

Select the kind of form loaded in the printer.

 

Name

If you don’t see your form, select it from the

 

 

Name list. You can select a different kind of

 

 

form for each source. Select the source first

 

 

and then choose the kind of form you want

 

 

from the Name list.

Setting Up Your Software 2-19