4. If you are connecting the parallel interface, squeeze the wire | 1 | |
clips together until they lock in place on either side of the | ||
| ||
connector. If your cable has a ground wire, connect it to the |
| |
printer’s ground connector as shown below. |
|
If you are connecting the serial interface, fasten the screws on the cable connector. (If your cable has a ground wire, connect it to the printer’s ground connector as shown above.)
Note:
If the screws that come with the cable do not fit into the connector lock nuts on the interface, replace the lock nuts with the optional lock nuts provided with the printer.
Setting Up the Printer