Allows you to select the manual feed mode for the MP tray.
If you select Off, the manual feed mode is disabled and the printer starts printing immediately when a job is received. If you select 1st Page, the printer doesn’t start printing when a job is received but starts printing after you press the N Start/Stop button. If you select Each Page, the printer doesn’t start printing when a job is received and then prints pages one by one each time you press the N Start/Stop button.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether printing starts from the front or back of the page.
Paper Type
Specifies the type of paper to be used for printing. The printer adjusts the printing speed according to this setting. The printing speed is reduced when Thick, Extra Thk, or Trnsprnc is selected.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in the ESCP2 or I239X mode.
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 161 |