Epson EPL-N2550 270

	The Data Format setting is different	If the file is created in an application that
	from the data format setting	allows you to change the data format or
	specified in the application (except	encoding, such as Photoshop, make sure
	on Mac OS X)	that the setting in the application
		matches that in the printer driver.

	The network connection is	If the network connection is something
	something other than AppleTalk,	other than AppleTalk, make sure that the
	and the Data Format setting is not	Data Format setting is set to ASCII data or
	set to ASCII data.	Tagged binary communications protocol
		(Windows) or set to ASCII (Macintosh).

	For Windows 2000 users only	When AppleTalk is active and Job
	Job Management On is selected in	Management ON is selected, the printer
	Job Management On is selected in	does not print normally. Make sure to
	the printer’s Properties.	does not print normally. Make sure to
	the printer’s Properties.	clear the Job Management On check
		clear the Job Management On check
		box on the Job Settings sheet of the
		printer’s Properties.

	For Windows users only	Make sure that both the Send CTRL+D
	The computer is connected to the	Before Each Job and Send CTRL+D After
	The computer is connected to the	Each Job settings are set to No.
	network using AppleTalk in a	Each Job settings are set to No.
	network using AppleTalk in a
	Windows 2000 environment, and
	the Send CTRL+D Before Each Job
	or Send CTRL+D After Each Job
	setting on the Device Settings sheet
	of the printer’s Properties dialog box
	is set to Yes.

	For Windows users only	Click Advanced on the PostScript sheet of
	The print data is too large.	the printer’s Properties, then change the
	The print data is too large.	Data Format setting from ASCII data
		Data Format setting from ASCII data
		(default) to Tagged binary
		communications protocol.
		When the Binary setting is set to On, TBCP
		is not available. Use the Binary protocol.
		See "PS3 Menu" on page 171 for details.

	For Windows users only	Click Advanced on the PostScript sheet of
	Printing cannot be performed using	the printer’s Properties, then change the
	Printing cannot be performed using	Data Format setting from ASCII data
	the network interface.	Data Format setting from ASCII data
	the network interface.	(default) to Tagged binary
		(default) to Tagged binary
		communications protocol.
		When the Binary setting is set to On, TBCP
		is not available. Use the Binary protocol.
		See "PS3 Menu" on page 171 for details.

270Troubleshooting