❏When printed envelopes are wrinkled, open Cover B and push up the form feed pressure change levers at both sides of the fuser unit until they are in the vertical position. It may reduce the wrinkles in the envelopes. When using paper other than envelopes, be sure to push the levers back down.
wWarning:
Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked CAUTION HOT SURFACE and CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to allow the heat to subside before doing so.
When loading envelopes, you should make paper settings as shown below:
Paper Source | MP tray (up to 10 envelopes) |
|
|
MP Tray Size setting in the | Mon, C10, DL, C5, C6, IB5 |
Tray Menu |
|
|
|
Printer driver settings | Paper Size: Mon, C10, DL, C5, C6, IB5 |
| Paper Source: MP tray |
|
|
52Paper Handling