Toner Out
If this item is set to Stop, the printer displays an error message, Replace Toner, to let you know when the toner is out. See "Status and Error Messages" on page 181. To disable this function, set this item to Continue.
Note:
❏If you set Stop and a toner out error occurs, you can restart printing by pressing the N Start/Stop button. The printout continues until another 100 sheets are printed or the current job is finished. The print result may be different from what you expected because there may not be enough toner to print the data.
❏If this item is set to Continue, the print result may be different from what you expected because there may not be enough toner to print the data.
LCD Contrast
Adjusts the contrast of the LCD panel. Use the u Up and d Down buttons to set the contrast between 0 (lowest contrast) and 15 (highest contrast.)
Reset MenuThis menu allows you to cancel printing and reset the printer settings.
Clear Warning
Clears warning messages that show errors except for these that occur from consumable products or
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 163 |