If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Status and Error MessagesThis section contains a list of error messages shown on the LCD panel, giving a brief description of each message and suggestions for correcting the problem. Note that not every message shown on the LCD panel indicates a problem. When the 
mark is displayed at the left of the warning message, multiple warnings occur. To confirm all warnings that occur, press the d Down
button to display the Status Menu, then press the 
Enter button. The LCD panel also displays the amounts of remaining toners.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently receiving or printing. This message appears when the + Cancel Job button has been pressed down for more than 2 seconds.
Cancel Print Job
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 181 |