Cause | What to do |
|
|
You may use the printer fonts | In the printer driver, choose the Print |
substituted for specified TrueType | TrueType fonts as bitmap button in the |
fonts. | Extended Settings dialog box. |
|
|
The selected font is not supported | Make sure that you have installed the |
by your printer. | correct font. See "Available fonts" on |
| page 309 for more information. |
|
|
Cause | What to do |
|
|
The interface cable may not be | Make sure that both ends of the interface |
plugged in securely. | cable are plugged in securely. |
|
|
You may not be using the correct | If you are using the parallel interface, |
interface cable. | make sure that the cable is a |
| |
| cable no more than six feet in length. |
| If you are using the USB interface, use a |
| Revision 2.0 cable. |
|
|
The emulation setting for the port | Specify the emulation mode by using the |
may not be correct. | printer’s control panel menus. See |
| |
|
|
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified service representative.
248Troubleshooting