The problems listed in this section are those that you may encounter when printing in the PCL6 mode. All procedural instructions, refer to the PCL6 printer driver.
The printer does not print
Cause | What to do |
|
|
The Print to file check box is | Clear the Print to file check box in the Print |
selected in the Print dialog box. | dialog box. |
|
|
The font on the printout is different from that on the screen
Cause | What to do |
|
|
The EPSON Font Manager fonts | The EPSON Font Manager fonts must be |
are not installed. | installed on the computer that you are |
| using. Otherwise, the font that you select is |
| substituted by some other font for display on |
| the screen. |
|
|
The edges of texts and/or images are not smooth
Cause | What to do |
|
|
The resolution is set to 300 dpi. | Access the printer driver, click the Graphics |
| tab, then select 600 dpi as the resolution. |
|
|
The printer does not have | Increase the printer memory. |
sufficient memory. |
|
|
|
The RITech is set to Off. | Access the printer driver, click the Graphics |
| tab, then select On for RITech from the |
| |
|
|
272Troubleshooting