Install a new imaging cartridge. See "Imaging Cartridge" on page 213 for instructions.
This error is not displayed when the Toner Out setting is set to Continue in the control panel setting. When the Toner Out setting is set to Continue, replace the imaging cartridge if the printout is light or faint.
Reset
The printer’s current interface has been reset and the buffer has been cleared. However, other interfaces are still active and retain their settings and data.
Reset All
All printer settings have been reset to the default configuration, or to the last settings that were saved.
Reset to Save
A control panel menu setting was changed while the printer was printing. Press the N Start/Stop button to clear this message. The setting will become effective after printing has finished.
ROM Check
The printer is checking the ROM.
Self Test
The printer is performing a quick internal check.
Service Req xyyyy
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 189 |