Note:

❏Binary can only be used with network connection.

❏You do not have to select On when using AppleTalk.

To use the Binary data, make sure your application supports Binary data and that SEND CTRL-D Before Each Job and SEND CTRL-D After Each Job are set to No.

When this setting is set to On, you cannot use TBCP (Tagged binary communication protocol) and Job Management in the printer driver settings.

Text Detection

When you select On, the text file is converted to a postscript file when printing. This setting is available only when you select PS3 in the Emulation Menu.

ESCP2 Menu

This menu allows you to make settings which affect the printer when it is in the ESC/P 2 emulation mode.

172Using the Control Panel