Item

Settings (default in bold)

 

 

USB I/F*1

On, Off

 

 

USB ExtI/F Confg*2

No, Yes

 

 

Get IP Address*3

Panel, Auto, PING

 

 

IP*3*4*5

0.0.0.0 to 255.255.255.255

SM*3

0.0.0.0 to 255.255.255.255

 

 

GW*3

0.0.0.0 to 255.255.255.255

 

 

NetWare*3

On, Off

 

 

AppleTalk*3

On, Off

 

 

MS Network*3

On, Off

 

 

Rendezvous*3

On, Off

 

 

USB Ext I/F Init*3

-

 

 

Buffer Size*1

Normal, Maximum, Minimum

 

 

*1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again.

*2 Available only when a USB external device with D4 support is connected. The USB Config setting is set to No automatically when exiting the panel settings.

*3 Available only when a USB external device with D4 support is connected and the USB Config setting is set to Yes. The contents of the settings depend on the USB external device settings.

*4 Available only when the Get IPAddress setting is set to Auto. This setting cannot be changed.

*5 When the Get IPAddress setting is changed from Panel or PING to Auto, the panel setting values are saved. When Auto is changed to Panel or PING, the saved setting values are displayed. 192.168.192.168 if the settings are not made from the panel.

USB I/F

Allows you to activate or deactivate the USB interface.

7

7

7

7

7

7

7

7

7

7

7

7

Using the Control Panel

167