Epson EPL-N2550 Print quality or tone is uneven, White dots appear in the printout

You may not be using the correct	If the surface of your paper is too rough,
type of paper for your printer.	printed characters may appear distorted
	or broken. EPSON special paper, or
	smooth, high-quality copier paper is
	recommended for best results. See
	"Available paper types" on page 276 for
	information on choosing paper.
The paper path inside the printer	Turn off the printer. Clean internal printer
may be dusty.	components by printing three pages with
	only one character per page.

White dots appear in the printout

Cause	What to do
The paper path inside the printer	Turn off the printer. Clean internal printer
may be dusty.	components by printing three pages with
	only one character per page.

Print quality or tone is uneven

Cause	What to do
Your paper may be moist or damp.	Do not store paper in a humid or damp
	environment.
There may be no toner left in the	If the message on the LCD panel or in
imaging cartridge.	EPSON Status Monitor indicates that the
	amount of toner left is low, see "Replacing
	an imaging cartridge" on page 214.
	You can also check the remaining toner
	with the following symbols on the Basic
	Settings tab in the printer driver.
	Toner low: !
	Toner end: ⋅
The Density setting may be too low.	Increase the Density setting in the Printing
	Menu on the control panel.

250Troubleshooting