Paper HandlingSingle sheets do not feed properlyPaper does not feed.

Continuous paper may be left in the printer. Remove the continuous

 

paper. Set the paper-release lever to the single-sheet position. Insert a

 

new sheet.

4

Move the paper a little to the left.

Paper feeding is crooked or the paper jams.

The paper was not fed correctly or is of the wrong type. Turn off the printer and pull out the paper. Insert a new sheet straight into the paper guide. Make sure you’re using the right type of paper. See the paper specifications under “Printer Specifications” on page A-4.

Paper does not eject completely.

Use the LF/FF button to eject the page.

The paper may be too long. Use paper that is within the specified range. See the paper specifications under “Printer Specifications” on page A-4.

Continuous paper does not feed properlyThe tractor does not feed the paper.

The paper-release lever may be in the wrong position. Check that the paper-release lever is pulled forward to the continuous-paper position. If not, turn off the printer, move the lever, and turn it on again.

Troubleshooting 4-9