Removing a printed document from the push tractor
Follow these steps to remove the printed document:

2

1. Make sure the Tear Off (Pitch/Font) lights are flashing.

Note:

If they are not flashing, you may need to set the Tear Off setting on as a default. See “Changing default settings” on page 2-9to change the default setting.

2.Open the paper guide cover, then tear off the printed document using the tear-off edge of the paper tension unit.

Note:

If your paper’s perforation is not properly aligned with the tear-off edge, you can adjust the tear-off position using the Micro Adjust feature. See “Adjusting the tear-off position” on page 2-25.

cCaution:

Never use the paper-feed knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position.

Using the Printer

2-15