Installing and Using Options
Cut-sheet feeder

2

 

The optional single-bin cut-sheet feeder (C80639✽) handles up to 50 sheets of standard bond paper (82 g/m² or 22 lb) without reloading.

Follow these steps to install the cut-sheet feeder:

1.Make sure the printer is turned off. Remove the paper guide and open the paper guide cover.

2.If the tractor is installed in the pull-tractor position, remove it and reinstall it in the push-tractor position.

3.Make sure the paper-release lever is in the single-sheet position.

Using the Printer

2-33