4.Press the LF/FF Dbutton to feed the paper backwards, or press the Load/Eject Ubutton to feed the paper forwards, until the paper perforation is aligned with the tear-off edge.

tear-off edge

Note:

The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper.

5.After you set the tear-off position, press the Pause button to exit the Micro Adjust mode.

6.Tear off the printed pages.

When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing.

2-26Using the Printer