cCaution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise, you may damage the printer.

2.While holding down the Pitch (Font) button, turn on the printer. The printer enters the Default Setting mode.

3.Load the next sheet of paper, if necessary. The printer prints the current settings list (one page).

4.Press down the Pitch (Font) button. The printer prints the Default Setting mode instructions (three or four pages) in the language you selected. The printed instructions list the default settings you can change, describe how to change them, and show you how the control panel lights help you make settings.

5.Follow these instructions to change the default settings using the buttons on the printer’s control panel.

6.When you finish making settings, turn off the printer and exit the Default Setting mode. Any settings you have made remain in effect until you change them again.

Note:

Turn off the printer when it has finished printing.

Printing on Continuous Paper

Your printer can handle continuous paper from 101.6 mm

(4.0 inches) to 406.4 mm (16.0 inches) wide. Depending on where you position the tractor, you can use it as a pull tractor or a push tractor. The following guidelines can help you decide where to position the tractor:

2-10Using the Printer