Manual feed wait time

This sets the amount of wait time between the time paper is inserted into the paper guide and when it is fed. If the paper feeds before you can adjust its position to your satisfaction, you can

increase the wait time.

2

 

Buzzer (beeper)

 

The printer beeps when an error occurs. (See “Using the Error

 

Indicators” on page 4-2for more information on printer errors.)

 

If you do not want the printer to beep when an error occurs, turn

 

this setting off.

 

Roll paper

 

When you turn on this mode, the printer recognizes that single

 

sheets are not loaded in the printer, so it does not try to eject the

 

paper and advance it forward to the next page when you press

 

the LF/FF button.

 

Changing default settings

 

Follow these steps to enter the Default Setting mode and change

 

the printer’s default settings:

 

Note:

❏To print the Default Setting mode instructions, you need four sheets of A4 or Letter size single-sheet paper, or four pages of continuous paper that is at least 305 mm (12 inches) long and 210 mm (8.27 inches) wide.

❏If you use single sheets without an optional cut-sheet feeder, you need to feed a new sheet of paper each time the printer ejects a printed sheet.

1. Make sure paper is loaded and the printer is turned off.

Using the Printer

2-9