Installing the software in Windows Me, 98, 95,

1

2000, or NT 4.0

Follow these steps to install the printer software in Windows Me, 98, 95, 2000, or NT 4.0:

Note:

❏Installing the printer software for Windows 2000 or NT 4.0 may require administrator privileges. If you have problems, ask your administrator for more information.

❏If you wish to make a floppy disk version of the printer software on your CD-ROM, insert the CD and run the SETUP.exe. In the dialog box that appears, double-click the Create Floppy based printer driver/utility disks. button and follow the on-screen instructions.

❏If you are using the floppy disk version of the EPSON software, make a backup copy of the EPSON printer software disk or disks before you begin installation.

❏If the New Hardware Found screen or any other wizard appears when you turn on your computer, click Cancel and follow the steps below.

❏If the Digital Signature Not Found screen appears, click Yes. If you click No, you must reinstall the printer driver as described below.

❏Installation time varies depending on your computer.

1.Make sure Windows Me, 98, 95, 2000, or NT 4.0 is running and the printer is off.

2.Insert the printer software CD-ROM into the CD-ROM drive. The Install dialog box appears. If it does not, double-click the My Computer icon. Click the CD-ROM icon, then select Open from the File menu. Then double-click SETUP.exe. (If you are using a floppy disk, insert the disk into the floppy disk drive. Double-click the floppy disk drive icon and then double-click the FD_SETUP.exe icon.)

Setting Up the Printer

1-21