Printing with the pull tractor

To load continuous paper using the pull tractor, you must move the tractor to the pull tractor position, as described in steps 1 through 3 in this procedure. If your tractor is already installed in 2 this position, make sure the printer is turned off and skip to step 6.

cCaution:

❏Use the paper-feed knob on the right side of the printer only to clear paper jams and only when the printer is off. Otherwise, you may damage the printer or cause it to lose the top-of-form position.

❏When using the pull tractor, set the Auto tear off feature in the Default Setting mode to Off; otherwise, the paper may jam.

1.Turn the printer off; then remove the printer cover and the paper guide. Next, remove the paper tension unit by squeezing the tension unit’s lock tabs gently and pulling the tension unit away from the printer. Finally, pull the paper- release lever forward to the continuous paper position.

Using the Printer

2-17