Epson SP7890K3 manual Appendix B Using Optional Auto Take-Up Reel, Sensor light status Description

Appendix B:

Using the

Optional Auto

Take-Up Reel

199

If you want to print multiple images on roll paper and have the printouts rolled up automatically, you can use the optional Auto Take-Up Reel (Epson Stylus Pro 9890 only).

To install the Auto Take-Up Reel, follow the instructions in the manual that came with it.

You can wind your printed media either forward (with the printed surface outside), or backward (with the printed surface inside).

Note: Epson

Doubleweight or Singleweight Matte paper should be wound forward.

Winding forward Winding backward

The table below describes the status of the Auto Take-Up Reel as indicated by the Sensor light.

Sensor light status	Description
On	Ready to use.
Flashing rapidly	Operating
Flashing slowly	Power-saving mode
Flashing very slowly	The Auto Take-Up Reel has an error and stopped
	working; check the installation and see page 187 for
	additional solutions.
Off	Turned off.

Sensor light