Epson SP9890K3, SP7890K3 manual Connecting to Your System

48 Setting Up the Printer

Caution: Charging takes about 15 minutes. Never turn off the printer, remove the maintenance tank, or open the front cover or ink covers while the P Power light is flashing, or you may damage the printer.

6.After installing all 9 cartridges, close the ink covers. The printer begins charging the ink delivery system and the P Power light flashes.

After ink charging is completed, you need to load paper before READY will appear on the display. See page 55 for instructions.

Connecting to Your System

You can use USB and/or Ethernet network connections.

For USB connection, make sure your system has the appropriate port and you have a standard, shielded cable 10 feet (6 m) long or less.

To connect to a network hub, you need a standard RJ-45 CAT-5 network cable. To connect directly to your computer’s network interface, you need an RJ-45 CAT-5 crossover cable.

1. Make sure that both the printer and the computer are turned off.