52 Setting Up the Printer
Note: With Windows XP, if you see a Found New Hardware Wizard screen, select No, not this time, click Next, and click Next again.
7.Read the license agreement and click Accept.
8.When you see a screen asking you to turn on the printer, press the printer’s P Power button. (Make sure the printer is connected; see page 48.)
For network connection, click the Manual button, select the port you created for the printer, and click OK.
If you didn’t create a port for the printer, select FILE.
9.When you see the final installation screen, click Exit.
10.Register your printer with Epson, then remove the printer software
11. If you need to create a port, see the Network Guide.
Go to the next section to update the printer firmware, if necessary.
Tip: For best results, use a USB connection when you update the firmware on your printer.
Updating Your Printer Firmware
To keep your printer features and functionality up to date, you should check for a newer version of firmware on the Epson support site and update your printer, if necessary.
Checking the Current Firmware Version
1.Press the r Menu button.
2.Press the d button until PRINTER STATUS is highlighted, then press
Menu.
3.Press Menu again and note the firmware version displayed. When done, press the l button.
