162Maintaining and Transporting the Printer
2.Tighten the screw using a
Note: Reinstall the optional SpectroProofer if necessary, following the instructions that came with it. Then turn on the printer and press the OK button.
3. Align the cover, then press it in until it clicks into place.
4.Press OK to finish the replacement process. The cutter moves to home position.
5.Run the Cutter Adjustment from the Maintenance Menu on the control panel.
After you print the pattern, put the two cut pieces together and select the pattern with the most precise cut between the two colors. Select the pattern number on the control panel and press OK.
