4.Select Projector ID and press Enter.
5.Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID
The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to set the remote control to operate only a particular projector, you need to set the remote control's ID to match the projector's ID.
1.Turn on the projector you want the remote control to operate with exclusively.
2.Set the remote control ID switch to On.
128
