Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the EasyMP Monitor software.

6.When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.

7.Turn off the projector, then turn it on again to enable the setting.

Parent topic: Crestron RoomView Support

Related references

Projector Setup Settings - Extended Menu

Controlling a Networked Projector Using Crestron RoomView

Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser.

1.Start your web browser on a computer connected to the network.

2.Type the projector's IP address into the browser's address box and press the computer's Enter key. You see this screen:

3.Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box.

77

Page 77
Image 77
Epson Z9750UNL, Z9870UNL, Z11005NL, Z9900WNL Controlling a Networked Projector Using Crestron RoomView, Related references