Epson Z11005NL, Z9870UNL, Z9900WNL, Z9870NL, Z9800WNL, Z9750UNL Connecting to an HDBaseT Transmitter

2. Connect the other end to the projector's SDI port.

Parent topic: Connecting to Video Sources

Connecting to an HDBaseT Transmitter

To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e STP cable or better.

1.Turn off the projector and HDBaseT transmitter.

Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting a network cable between the two devices.

2.Connect one end of the network cable to the HDBaseT port on the transmitter.

46