3 PushMULTI-CONTROL left or right to
selectthe equalizer band to adjust.
Eachpushing MULTI-CONTROL left or right
selectsequalizer bands in the following order:
50801252003155008001.25k
2k3.15k5k8k12.5k(Hz)
4 PushMULTI-CONTROL up or down to
adjustthe level of the equalizer band.
Eachpushing MULTI-CONTROL up or down
increasesor decreases the level of the equali-
zationband.
+66is displayed as the level is increased
ordecreased.
#Youcan then select another band and adjust
thelevel.
5 PressBAND/ESC to cancel the 13-band
graphicequalizer mode.
Using BBE sound
WithBBE, playback very closeto the original
soundcan be obtained by correction with a
combinationof phase compensation and
high-rangeboost for the delay of thehigh-fre-
quencycomponents and the amplitude devia-
tionoccurring during playback. This function
makesit possible to reproduce the dynamic
soundfield as if you are listening to a live per-
formance.
WithBBE sound processing technology, you
canadjust the level of BBE.
1 UseMULTI-CONTROL to select BBE.
Thefunction name tag BBE is highlighted.
2 PressMULTI-CONTROL to turn BBE on.
#Toturn BBE off, press MULTI-CONTROL
again.
3 PushMULTI-CONTROL up or down to
adjustthe level of BBE.
Eachpushing MULTI-CONTROL up or down
increasesor decreases the level of BBE.
+44is displayed as the level is increased
ordecreased.
Note
Manufacturedunder license from BBE Sound,
Inc.The mark BBE is a trademark of BBE Sound,
Inc.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 UseMULTI-CONTROL to select LOUD.
Thefunction name tag LOUD is highlighted.
2 PressMULTI-CONTROL to turn loudness
on.
LoudnessON appears in the display.
#Toturn loudness off, press MULTI-CONTROL
again.
Using automatic soundlevelizer
Duringdriving, noise in the car changes ac-
cordingto the driving speed and road condi-
tions.The automatic sound levelizer (ASL)
monitorssuch varying noiseand automati-
callyincreases the volume level, if this noise
becomesgreater. The sensitivity (variation of
volumelevel to noise level) of ASL can beset
toone of five levels.
1 UseMULTI-CONTROL to select ASL.
Thefunction name tag ASL is highlighted.
Audio Adjustments
En
54
Section
11