placethe microphone on the front passenger
seatto carry out auto TA and EQ.
3 Turnthe ignition switch to ON or ACC.
Ifthe car s air conditioner or heater is turned
on,turn it off. Noise from the fan in the air
conditioneror heater may prevent correct auto
TAand EQ.
#PressSOURCE to turn the source on if this
unitis turned off.
4 Selectthe position for the seat on
whichthe microphone is placed.
Referto Using the position selector on page
48.
#Ifno position is selected before you start auto
TAand EQ, Front Left is selected automatically.
5 PressSOURCE and hold until the unit
turnsoff.
6 Pressand hold EQ to enter the autoTA
andEQ measurement mode.
Thefront panel opens automatically.
7 Plugthe microphone into the micro-
phoneinput jack on this unit.
8 PressMULTI-CONTROL to start the auto
TAand EQ.
9 Getout of the car and close the door
within10 seconds when the 10-second
count-downstarts.
Themeasurement tone (noise) is outputted
fromthe speakers, and auto TA and EQ be-
gins.
#Whenall speakers are connected, auto TA
andEQ is completed in about six minutes.
#Tostop auto TA and EQ, press
MULTI-CONTROLagain.
#Tocancel auto TA and EQ part way through,
pressBAND/ESC.
10 Whenauto TA and EQ is completed,
Completeis displayed.
Whencorrect measurement of car interior
acousticcharacteristics is not possible, an
errormessage is displayed. (Refer to Under-
standingauto TA and EQ error messages on
page65.)
11 PressBAND/ESC to cancel theauto TA
andEQ mode.
12 Storethe microphone carefully in the
glovecompartment.
Storethe microphone carefully in the glove
compartmentor any other safe place. If the
microphoneis subjected to direct sunlight for
anextended period, high temperatures may
causedistortion, color change or mal-
function.
Audio Adjustments
En 57
English
Section
11