Extron electronic MKP 2000 user manual Reference Data, cont’d Mounting and Cabling Specifications

Reference Data, cont’d

Mounting and Cabling Specifications

Electrical box cutout

Any standard box that meets the local electrical codes can be used, but boxes from different manufacturers can have different size openings. Extron recommends testing the fit of the MKP inside the electrical box and then placing the box flush against the mounting surface and tracing the cutout area.

Panel mount cutout template

Figure A-1 is a drawing that shows the dimensions for cutting a hole to accommodate the keypad circuit board for mounting the keypad on a flat surface. This type of installation can include a desk or podium, or a control panel or dashboard, where the back is protected and does not require an electrical box.

Drawn to scale; may be used as a template.

3.38”	I/O
2.63”	VOLUME
Circuit Board Box
(behind front panel)
(cut-out area should be slightly
larger)
	MKP 2000

Full Size

Figure A-1 — Panel mount cutout template

A-4 MKP 2000 Remote Control Panel • Reference Data MKP 2000 Remote Control Panel • Reference Data A-5