Extron electronic MVX VGA A manual Operation, cont’d, Control buttons, Preliminary

PRELIMINARY

Operation, cont’d

Control buttons

D Enter button and/or LED — The Enter button and LED have three primary functions (•) and four secondary functions (❏):

• Saves changes that you make on the front panel. To create a simple

		configuration:
		 Specify RGBHV, audio, or both (see I/O selection buttons [H] and
		[I]).
		 Press the desired input button (A).
		 Press the desired output button(s) (B).
		 Press the Enter button.
	•	Indicates that a potential tie has been created but not saved.
	•	Indicates that a global preset has been selected to be saved or recalled but
		that the preset action has not been accomplished.
	❏	With the Preset, View, and Esc buttons, selects Serial Port Configuration
		mode. See “Selecting the rear panel Remote port protocol and baud rate”
		on page 3-38.
	❏	Selects 9600 baud for the Remote port in Serial Port Configuration mode.
		See “Selecting the rear panel Remote port protocol and baud rate” on
		page 3-38.
	❏	Indicates that the Remote port is set to 9600 baud in Serial Port
		Configuration mode. See “Selecting the rear panel Remote port protocol
		and baud rate” on page 3-38.
	❏	With the RGBHV and Audio buttons, select front panel security lockout
		mode 2 or toggle between mode 0 (unlocked) and mode 2. See “Setting
		the front panel locks (Executive modes)” on page 3-36.
E	Preset button and/or LED — The Preset button and LED have two primary
	functions (•) and three secondary functions (❏):
	•	Activates Save Preset mode to save a configuration as a preset and Recall
		Preset mode to activate a previously-defined preset.
	•	Blinks when Save Preset mode is active and lights steadily when Recall
		Preset mode is active.

❏ With the Enter, View, and Esc buttons, selects Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏ Selects 19200 baud for the Remote port in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏ Indicates that the Remote port is set to 19200 baud in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

3-4 MVX VGA A Matrix Switchers • Operation