Extron electronic MVX VGA A manual Example 1 Creating a set of video and audio ties

Example 1: Creating a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your actions.

NThis example assumes that there are no ties in the current configuration.

1. Press and release the Esc button (figure 3-3).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= LED blinks once. The LED blinks once.

Figure 3-3 — Clear all selections

2. To select video and audio for the tie, if necessary, press and release the RGBHV button and the Audio button until both the RGBHV and Audio LEDs light (figure 3-4).

I/O

RGBHV AUDIO

Press the RGBHV button to toggle on and off. Press the Audio button to toggle on and off. The LED lights when selected. The LED lights when selected.

Figure 3-4 — Select RGBHV and audio

3. Press and release the input 5 button (figure 3-5).

Press and release the Input 5 button.

				INPUTS
3	4	5	6

The Input 5 LED lights.

Figure 3-5 — Select an input

PRELIMINARY

MVX VGA A Matrix Switchers • Operation 3-9