Extron electronic MVX VGA A manual Example 3 Removing a tie from a set of video and audio ties

Example 3: Removing a tie from a set of video and audio ties

In the following example, an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1 and example 2.

1. Press and release the Esc button (figure 3-15).

Press the Esc button to clear all selections.

CONTROL

1

ENTER PRESET VIEW ESC

1= LED blinks once. The LED blinks once.

Figure 3-15 — Clear all selections

2. To select audio only for the tie, if necessary, press and release the RGBHV button and/or Audio button (figure 3-16).

I/O

									RGBHV AUDIO
					Press the RGBHV button to toggle on and
										off. Press the Audio button to toggle on and off.
							The LED is unlit when deselected. The LED lights when selected.
				Figure 3-16 — Select audio only
			3.		Press and release the Input 5 button (figure 3-17).
	Press and release the Input 5 button.
	The LED lights.					INPUTS		The Output 3, Output 4, and Output 8 LEDs light to indicate
								the audio ties created in example 1.
2	3	4		5	6		7	The output 1 LED does not light to indicate the tie created
								in example 2 because that tie is RGBHV only.
							1	2		3	4		5	6	7	8
												OUTPUTS

Figure 3-17 — Select an input

PRELIMINARY

MVX VGA A Matrix Switchers • Operation 3-13