Extron electronic MVX VGA A manual Select the outputs

PRELIMINARY

Operation, cont’d

4. Press and release the output 3, output 4, and output 8 buttons (figure 3-6).

NThe entire set of ties can be canceled at this point by pressing and releasing the Esc button. The Esc LED flashes once.

Press and release the Output 3, Output 4, and Output 8 buttons. The buttons blink to indicate that the selected RGBHV and audio input will be tied to these outputs.

								ENTER PRESE
1	2	3	4	5	6	7	8	The Enter LED blinks to indicate
								the need to confirm the change.

OUTPUTS

= Blinking LED

Figure 3-6 — Select the outputs

5.	Press and release the Enter button (figure 3-7).
	Press the Enter button to confirm
	the configuration change.
		The Enter LED and all input LEDs and
		output LEDs return to the unlit state.
	ENTER

Figure 3-7 — Press the Enter button

The current configuration (figure 3-8) is now:

•Input 5 (video and audio) is tied to output 3, output 4, and output 8.

Input 5 (video/audio) tied

to outputs 3, 4, and 8

Input

5

3

4 Output

8	Video
	Audio

Figure 3-8 — Example 1, final configuration

3-10 MVX VGA A Matrix Switchers • Operation