Extron electronic manual Preliminary, MVX VGA A Matrix Switchers Operation

F View (<) button and/or LED — The View (<) button and LED have two primary functions (•) and six secondary functions (❏):

•Selects a View-onlymode that displays the current configuration.

NView-onlymode also provides a way to mute and unmute the outputs. See “Muting and unmuting video and/or audio” on page 3-18.

•Indicates that View-onlymode is active.

❏Decreases the audio level of the selected input. See “Viewing and adjusting the input audio level” on page 3-25.

❏Indicates a negative (attenuation) audio level. See “Viewing and adjusting the input audio level” on page 3-25.

❏Decreases the volume of the selected output. See “Viewing and adjusting the output volume” on page 3-30.

❏With the Enter, Preset, and Esc buttons, selects Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏Selects 38400 baud for the Remote port in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏Indicates that the Remote port is set to 38400 baud in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

G Esc (>) button and/or LED — The Esc (>) button and LED have two primary functions (•) and six secondary functions (❏):

•Cancels operations or selections in progress and resets the front panel button indicators.

NThe Esc (>) button does not reset the current configuration, the RGBHV button and Audio selection button, any presets, or any audio gain or attenuation settings.

•Flashes once to indicate that the escape function has been activated.

❏Increases the audio level of the selected input. See “Viewing and adjusting the input audio level” on page 3-25.

❏Indicates a positive (gain) audio level. See “Viewing and adjusting the input audio level” on page 3-25.

❏Increases the volume of the selected output. See “Viewing and adjusting the output volume” on page 3-30.

❏With the Enter, Preset, and View buttons, selects Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏Selects 115200 baud for the Remote port in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

❏Indicates that the Remote port is set to 115200 baud in Serial Port Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-38.

PRELIMINARY

MVX VGA A Matrix Switchers • Operation 3-5