ESA612

Users Manual

1.

From the setup menu, press the softkey labeled

Viewing Memory

 

More twice to set F1 to the display contrast function.

Refer to the Using Memory section later in the manual to

2.

Press the softkey labeled Display Contrast.

learn about viewing memory and how to store data in the

3.

Press Gor Hto increase or decrease the display’s

Analyzer.

 

 

 

contrast respectively.

Setting the GFCI Limit

4.

Press the softkey labeled Done to exit contrast

To set the GFCI current limit:

 

setup.

1.

From the setup menu, press the softkey labeled

Setting up the Beeper

 

More to reveal additional menu selections.

To enable or disable the beeper:

2.

Press the softkey labeled Instrument to reveal the

1.

From the setup menu, press the softkey labeled

 

instrument setup selections.

 

 

 

More twice to set F2 to the beeper on/off function.

3.

Press the softkey labeled GFCI Limit to open the

2.

Press the softkey labeled Beeper to switch the

 

scroll box above the softkey label.

 

 

 

beeper on and off.

4.

Press Gor Hto adjust the current limit from 5 to

3.

Press the softkey labeled Done to go back to the

 

25 mA.

 

 

 

setup menu.

5.

Press the softkey labeled Done to exit the GFCI Limit

Viewing Instrument Information

 

setup function.

 

 

To view information about the Analyzer:

1.From the setup menu, press the softkey labeled More twice to set F3 to the instrument information function.

2.Press the softkey labeled Instrument Information.

3.After viewing the displayed information, press the softkey labeled Done to exit the information screen.

Performing Electrical Safety Tests

The Analyzer is designed to perform a number of different electrical and performance tests on biomedical equipment. The following sections describe the various tests and how to perform them using the Analyzer.

12

Page 26
Image 26
Fluke ESA612 Performing Electrical Safety Tests, Viewing Memory, Setting the Gfci Limit, Setting up the Beeper