Fluke ESA612 Making Point-To-Point Measurements, Measuring Resistance, Measuring Voltage

ESA612

Users Manual

Making Point-To-Point Measurements	3. Place the probe tips across the unknown voltage and
The Analyzer can make voltage, resistance, and low	read the measurement in the Analyzer’s display.
	The Analyzer will measure up to 300 volts ac.
current measurements through its Point-to-Point function.
To access the Point-to-Point function menu shown in	Measuring Resistance
Figure 31, press R. Softkeys F1 through F3 are used	To make a resistance measurement:
to select the measurement function.
	1. Press the softkey labeled Resistance from the
	Point-To-Point menu.
	2. Insert test leads in the RED (V/Ω/A ) and BLACK
	jacks.
	3. Null lead resistance by shorting the leads together
	and pressing the softkey labeled Zero Leads.
	4. Place the probes across the unknown resistance and
	read the measurement in the Analyzer’s display.
	The Analyzer will measure resistances up to 2.0 Ω.
fis108.jpg
Figure 31. Point-To-Point Function Menu
Measuring Voltage
To make a voltage measurement:
1. Press the softkey labeled Voltage from the
Point-To-Point menu.
2. Insert test leads in the RED (V/Ω/A ) and BLACK
jacks.

50