Fluke ESA612 specifications Using Memory, Storing Data into Memory

ESA612

Users Manual

Using Memory	5. Press (enter save button) to store the Test Record ID.
The non-volatile memory of the Analyzer will store up to	6. Use G, H, F, and Eto enter the date of the Test
500 measurements or ECG information for each of 100	Record.
different Test Records. Each test record can be recalled to	7. Press Yto store the date.
the display of the Analyzer or exported to a PC. Data	The Test Record ID is displayed in the upper-left
Viewer software, available at
	corner of the display.
www.flukebiomedical.com/ESA612, is required to upload
	Note
memory data to a PC. Installation and operator
instructions are also located on the software web page.	If no record ID data is entered, a default ID of
Note	0000000000000001 and a date of --/--/-- is
	assigned to the record.
It is recommended that memory data be
uploaded daily or as often as possible to reduce
upload time.
Storing Data into Memory

Each of the six measurement functions allow data storage within the Analyzer. The ECG function allows storage of the simulated waveforms only for reference of tests performed. To store data, a Test Record ID should be created first. To input a new Test Record ID:

1.Press Qto open the screen shown in Figure 34.

2.Press Gor Hto set the first character. Available characters are 0-9, A-Z, and space.

3.Press Fto move to the next character position.

4.Fill in up to 15 character positions to identify a test record.

fis114.bmp

Figure 34. Test Record ID Entry Screen

8.After selecting a function, push Yto store the measurement or ECG signal under the Test Record ID.

54