Introduction

The Fluke Biomedical ESA612 Electrical Safety Analyzer (hereafter the Analyzer) is a full-featured, compact, portable analyzer, designed to verify the electrical safety of medical devices. The Analyzer tests to domestic (ANSI/AAMI ES1, NFPA 99) and international (IEC62353, AN/NZS 3551, and parts of IEC 60601-1) electrical-safety standards. The integrated ANSI/AAMI ES1 and IEC60601-1 patient loads are easily selectable.

The Analyzer performs the following tests:

Line (Mains) voltage

Ground Wire (or Protective Earth) Resistance

Equipment current

Electrical Safety Analyzer

Insulation resistance

Ground (Earth) leakage

Chassis (Enclosure) leakage

Lead to Ground (Patient) and Lead to Lead (Patient Auxiliary) leakage

Lead isolation (Mains on applied parts leakage)

Differential leakage

Direct equipment leakage

Direct applied part leakage

Alternative equipment leakage

Alternative applied part patient leakage

Point to point leakage, voltage, and resistance

ECG simulation and performance waveforms

1

Page 15
Image 15
Fluke ESA612 specifications Electrical Safety Analyzer, Introduction