Frymaster KSCF18G C.Filtering: Drain Valve and Oil Return Handles, disposal unit DANGER, Danger

KSCF18G COOL ZONE SERIES GAS FRYERS

CHAPTER 3: INSTALLATION INSTRUCTIONS

3.9 Safety Switches (cont.)

C.Filtering: Drain Valve and Oil Return Handles

1.Drain Valve Handle: RED HANDLE. Push the red handle (located in the fryer cabinet) to the right to open the drain valve when filtering. After all oil has drained from the frypot and/or polishing is complete, push the red handle left to close the drain valve.

2.Oil Return Handle: YELLOW LABEL. The handle beneath the yellow oil return label allows you to choose over-the-top or rear flush oil return. Pull and turn the handle to the desired oil return method to open the oil return valve and activate the pump motor. After the frypot is refilled and filtering is complete, turn and push the oil return handle to close the oil return valve and deactivate the pump motor. Activate this handle only when filtering.

See Chapter 5 for more information on filtering.

See Chapter 7 for troubleshooting information.	Drain valve handle (red).	Oil return handle
		(yellow label).

DANGER

Always ensure that the over-the-top oil return faucet is located over the frypot or an appropriate container before activating the over-the-top oil return system. If not, the hot oil will spill and may cause burns.

DANGER

Allow oil to cool to 100°F (38°C) before draining into a metal container, stockpot, or

disposal unit.

DANGER

When draining oil into a disposal unit or portable filter unit, do not fill above the

maximum fill line located on the container.

3-13