Frymaster manual Replace Frypot, Ultimate Electric Series Fryers, Service Procedures

ULTIMATE ELECTRIC SERIES FRYERS

CHAPTER 1: SERVICE PROCEDURES

1.8 Replace Frypot

1.Perform Procedure 1.5, Replace Temperature Probe, Steps 1-7.

2.Perform Procedure 1.2, Replace Computer/Controller, Steps 1-3.

3.Perform Procedure 1.7, Replace High-Limit, Steps 1-4.

4.Disconnect the element wire harnesses.

5.Remove the screws securing the capping piece from the fryer. Remove the capping piece and set aside.

6.If the fryer has a built-in filtration system, remove all the plumbing from the frypot, including oil-return and drain plumbing.

7.Remove the screws securing the frypot to the front frame of the fryer.

8.Carefully lift the frypot from the cabinet.

9.Remove the drain valve from the old frypot and install on the new frypot.

10.Apply Loc-Tite Sealant PST 567 to the high-limit threads. Install high-limit into the new frypot.

11.Disconnect the tilt plate springs from the old frypot.

12.Remove the securing screws from the tilt plate. Lift the tilt plate/heating element assembly from the old frypot and install on the new frypot.

13.Follow the preceding steps in reverse to install the new frypot into the fryer.

14.NOTE: Apply Loc-Tite Sealant PST 567 to all pipefittings prior to installation.

1-10