CHAPTER 6 Work after installation

6.3Configuring DNS server

-When alarm occurs in the time maintenance battery of the partition side. Execute any of the following ways to adjust the time.

-Set the time manually from the MMB Web-UI

-Set the time by using the NTP client function of the MMB

Remark

Set the time on Operation System if NTP is not used.

Operations

1.Click [Networking configuration] – [Date/Time].

→ [Date/Time] window is displayed. For the details of [Date/Time] window, see “1.5.1 [Date/Time] window” of

PRIMEQUEST 2000 series Tool Reference (C122-E177EN).

FIGURE 6.3 Example of [Date/Time] Window

2.Click [Enable] for [NTP].

3.Select [NTP Time Correction Mode].

4.Enter IP address of other NTP server. NTP Server 1: Specify NTP server. NTP Server 2: Specify NTP server is.

NTP Server 3: Specify Other (Tertiary) NTP server is.

5.Click [Apply] button.

MMB synchronizes with NTP server and time set in NTP Server 1 ~ NTP Server 3.

6.After few minutes click [Refresh] button and confirm whether the correct time is displayed.

6.3Configuring DNS server

See “3.3.8 DNS Server Configuration”, for configuration of DNS server.

97