CHAPTER 4 Installation of Operating System and bundled software 4.3 Procedures to install Windows into internal HDD/SSD

For details on setting value, see Manual of SAN storage device. -TimeOutValue

4.3Procedures to install Windows into internal HDD/SSD

This section briefly describes the procedures by which Windows is installed in the internal HDD/SSD. Start the installation after checking the MMB configuration and successful to log in to the MMB.

4.3.1Presetting

If necessary, the following settings are done.

1.Remove each built-in HDD that is not the installation destination.

2.The setting of partition is checked by MMB.

-Setting of configuration of SB/IOU

See “3.4.1 Setting the partition configuration”

-Setting of Console Redirection

See “3.4.6 Settings of Console Redirection”

-Video redirection: Enable

-Virtual media: Enable

-Setting of various modes

See “3.4.5 Various mode settings”

3.[PCI ROM Priority] of BIOS is set.

-For the UEFI Install

-Set [Device Manager]-[PCI Subsystem Configuration]-[PCI ROM Priority] of BIOS menu to ”EFI Compatible ROM”.

-For the UEFI Install:

-Set [Device Manager]-[PCI Subsystem Configuration]-[PCI ROM Priority] of BIOS menu to ”Legacy ROM”.

-Set [Device Manager]-[PCI Subsystem Configuration]-[OpROM Scan Configuration] of BIOS menu to “Enable” only for booting Device.

4.The I/O space is allocated in the SAS card and in the SAS RAID controllerRAID card.

For details on allocation of I/O space, see “3.4.5 Various mode settings” and [Configure I/O Space Assignment] menu” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN).

4.3.2Preparations for installation

The following preparations are done.

1.The following disk images are prepared. Media of Windows operating system

2.Remove all FC cables.

3.Mount the following disk image by connecting the video redirection.

4.Change the boot order, and set DVD Boot to the top priority of the starting order.

For details, see “1.3.1 [Power Control] window” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN).

4.3.3Installation of operating system

This section explains the installation of operating system using SVIM.

There are the following types of operating system installations using SVIM.

For the detailed procedures of each mode, see ServerView Suite ServerView Installation Manager.

51