Fujitsu 2000 2.4.3Grounding, 2.7Confirming the Supplied Parts, 2.5Checking the Installation Site, 2.6Preparing to Install the Main Unit

CHAPTER 2 Preparing for Main Unit Installation 2.5 Checking the Installation Site

becomes unstable, the component failure rate tends to rise.

The PRIMEQUEST2000 series supports the following power feed:

-redundant power feed

-dual power feed

For details on the power line configurations for redundant power connections and dual power connections, see 2.3 Power Cable Connections in the PRIMEQUEST2000 Series Hardware Installation Manual (C122-H007EN).

2.4.3Grounding

The PRIMEQUEST2000 series is shipped with grounded (three-wire) power cables. You need to connect the power cables to outlets with ground terminals. To determine the type of power supply in your building, contact the building manager or a qualified electrician.

2.5Checking the Installation Site

Before installing the main unit, confirm that the installation site has enough space for the required service (maintenance) area and for accommodating the peripheral devices. For details on checks of the installation site, see Chapter 1 Installation Information in the PRIMEQUEST2000 Series Hardware Installation Manual (C122- H007EN).

2.6Preparing to Install the Main Unit

TABLE 2.1 Accessories required in main unit installation lists the accessories required in main unit installation. Prepare these accessories in advance.

TABLE 2.1 Accessories required in main unit installation

Accessory name		Description
No. 2 Phillips screwdriver		Used to mount the unit in a rack.

Wrist strap		Used to prevent main unit damage from static electricity
		discharged from your body.

Conductive mat		Required for some system configurations. To order any of
		the accessories, contact the distributor where you
Ethernet Category 5 cable or better		the accessories, contact the distributor where you
		purchased your product, or your sales representative.
Console PC-to-LAN cable (for user LAN)		purchased your product, or your sales representative.

External switching hub		Used to connect the PRIMEQUEST2000 series server to
		an external switching hub via a LAN.

Multitester		Used to check the inputAC voltage.

2.7Confirming the Supplied Parts

Confirm that the delivered parts match the shipping list provided with the main unit.

If any of the parts listed in the shipping list or performance records are missing, incorrect, or damaged, contact the distributor where you purchased your product, or your sales representative.