CHAPTER 5 Work after Operating System installation 5.1 Types of work
CHAPTER 5 Work after Operating System installation
This chapter describes every setting that is required after the installation of the operating system of the PRIMEQUEST 2000 Series
5.1Types of workContent and type of operations that are to be implemented after installation of the operating system are given below.
TABLE 5.1 Type of operationsTask | Description | Installed operating |
| See |
| |
|
| system |
|
|
|
|
Setting of SVAgent | Setting of SVAgent | Linux, Windows | ||||
|
|
|
| |||
Setting of sadump | Setting of sadump | Linux |
| |||
Setting of Dump environment | Setting of Dump environment | Windows | ||||
|
|
| ||||
Setting of Dump environment | Setting of Dump environment | Linux | ||||
|
|
|
| |||
Setting of NTP client | Setting of NTP client | Linux |
| |||
|
|
|
| |||
Information management/Save | Management information of | Linux, Windows | ||||
configuration information | MMB / Save configuration |
| ||||
| information of BIOS |
|
|
|
|
|
Life monitoring setting according | Life monitoring setting of FBU | Linux, Windows | ||||
to RAS backup service | and UPS battery |
| ||||
|
|
|
|
| ||
Settings for following products must be done after installation of OS. See the following manuals for the details of the settings of SVagent/SVmco.
SVmco is necessary, only when you use PRIMECLUSTER linkage
-SVagent:
ServerView Operations Manager Installation ServerView Agents for Linux ServerView Operations Manager Installation ServerView Agents for Windows
-SVmco:
ServerView Mission Critical Option User Manual.
5.3Setting of sadumpIn sadump, the following items are set for each partition.
-Validation of sadump
-Collection address of dump
-Compression at the time of dump collection
-Movement after dump collection
-
72