Fujitsu 2000 1.1.2Work performed by the user, TABLE 1.1 Work performed by the user

CHAPTER 1 Installation Overview

1.1 Setup Workflow

1.1.2Work performed by the user

The user performs the following tasks in the order given.

TABLE 1.1 Work performed by the user

No.	Work item	Work tasks and description	See
1.	Setup	- Initializing partition settings	3.1.2 Partition Settings
		Perform tasks such as setting partition names
		and configuring partitions individually.
		- Connecting and configuring the MMB	3.3.3Setting of Connection for Actual
		(operating environment)	operating Environment
		- Setting up the connection environment for actual
		operation.
		Set up the MMB connection environment, such as
		by setting the IP addresses for actual operation.
		- Initializing MMB settings	3.3.10Registration of User Account
		Set the parameters for the entire MMB, such as the	3.3.11Setting of System Name
		user account names or system names.	3.3.12Setting of Date and Time
		- Setting various modes	3.4.5Various mode settings
		Set modes as needed.
		- Starting the system and confirming system startup	3.2System Startup
		Start the system and confirm that it has started
		normally.
		- Saving setting information	3.5Storage of the configuration
		Save the setting information for the MMB.	information
2.	Installing the OS and	Install the operating system and bundled software.	CHAPTER 4Installation of Operating
	bundled software.		System and bundled software
3.	Work after installation	Specify the monitoring method, and save the specified	CHAPTER 5Types of work
		information.
4.	Configuring SNMP	Configure SNMP and security.	CHAPTER 7Power ON and OFF of the
	and security		partition

2